Where this helps
- Packaging lines with limited straight length
- Bottles, jars and stable packs needing direction changes
- Compact production rooms
- U-shaped and L-shaped conveyor layouts
90 degree conveyor bends
90 degree conveyor bends for space-saving packaging lines.
Turn product flow cleanly around corners while keeping containers, cartons or packs supported and guided.
UK supportLayout planningMachine integrationQuote checklist
Buyer focus
A conveyor bend should be planned around the product, not just the floor plan.
A 90 degree conveyor bend can save space and improve operator access, but the bend radius, guide rails and product stability need to match the pack.
Bends are often used between filling, capping, labelling, inspection and packing areas when a straight line would be too long.
What to compare
- Bend radius and product footprint
- Inside and outside guide rail contact
- Transfer onto and off the bend
- Operator access around the corner
Information to send
- Product size and stability
- Direction of turn and available space
- Line speed through the bend
- Machines before and after the conveyor
Layout planning
Check these four points before you confirm the conveyor route.
Small details at planning stage can prevent unstable transfers, awkward access and output issues later.
Start with the product
Confirm size, weight, base shape and stability before choosing the conveyor type.
Check the machines
Match conveyor height, speed and direction to the equipment on either side.
Allow for access
Keep room for loading, cleaning, adjustment, inspection and safe operation.
Plan the buffer
Decide whether the line needs accumulation to protect output during short stops.
Useful next pages
Continue planning your conveyor enquiry.
These related pages help narrow down the conveyor type, layout and quote details.
Curved conveyors
Continue with practical conveyor information for your enquiry.
Open page →Small footprint layouts
Continue with practical conveyor information for your enquiry.
Open page →Layout checklist
Continue with practical conveyor information for your enquiry.
Open page →FAQ
Common questions
Clear answers for buyers comparing conveyor options and preparing an enquiry.
Can bottles go around a 90 degree conveyor bend?
Yes, if the bend, guide rails and conveyor type suit the bottle size, shape and stability.
Will a conveyor bend reduce floor space?
It can help fit the line into a smaller footprint, but access and cleaning space still need to be allowed.
What is needed to quote a conveyor bend?
Product details, turn direction, available space, working height and adjacent machines are the key details.
Start your conveyor enquiry
Get a conveyor quote
Send the pack details, output target and available line space.
Get practical conveyor advice based on the way your product needs to move through the line.