Where this helps
- Food trays and sealed packs
- Inspection and coding lines
- Manual packing stations
- Stable finished product movement
Tray conveyors packaging lines
Tray conveyors for packaging lines and finished products.
Move trays through inspection, coding, labelling and packing with a conveyor surface selected around the pack size and stability.
UK supportLayout planningMachine integrationQuote checklist
Buyer focus
Tray handling depends on base size, weight and presentation.
Trays usually need a clean, stable support surface and sensible transfer points. The conveyor route should also consider operators who check, pack or remove products.
If trays vary by size, guide rail adjustment and belt width should be reviewed before ordering.
What to compare
- Tray base and belt contact
- Conveyor width and transfer gap
- Coding or inspection access
- Packing area after the conveyor
Information to send
- Tray size range and weight
- Line speed and spacing requirements
- Whether products are open or sealed
- Packing or inspection process after conveying
Layout planning
Check these four points before you confirm the conveyor route.
Small details at planning stage can prevent unstable transfers, awkward access and output issues later.
Start with the product
Confirm size, weight, base shape and stability before choosing the conveyor type.
Check the machines
Match conveyor height, speed and direction to the equipment on either side.
Allow for access
Keep room for loading, cleaning, adjustment, inspection and safe operation.
Plan the buffer
Decide whether the line needs accumulation to protect output during short stops.
Useful next pages
Continue planning your conveyor enquiry.
These related pages help narrow down the conveyor type, layout and quote details.
Belt conveyors
Continue with practical conveyor information for your enquiry.
Open page →Date coding conveyors
Continue with practical conveyor information for your enquiry.
Open page →Packing conveyors
Continue with practical conveyor information for your enquiry.
Open page →FAQ
Common questions
Clear answers for buyers comparing conveyor options and preparing an enquiry.
What conveyor is used for trays?
Belt conveyors are often considered for stable trays, but the surface and width should suit the product.
Can tray conveyors feed coding equipment?
Yes, provided the product is stable and the coding area has suitable access and speed control.
Do tray conveyors need guide rails?
Guide rails may be useful where trays need to stay aligned or where multiple sizes are handled.
Start your conveyor enquiry
Get a conveyor quote
Send the pack details, output target and available line space.
Get practical conveyor advice based on the way your product needs to move through the line.